Engine. 150cc. long stroke 2 Valve. OORacing. Performance engine. Suitable for MADASS 125. Plug and play. 3 phase 100W gen

Engine. 150cc. 2 valve. Performance engine. Suitable for MADASS 125. Plug and play with 3 phase 100W gen
This is our full kit to convert your madass into a monster, its a full kit with all you will need to convert.

In the kit you will get:

• Engine 150cc 2 valve
• 1 x Reg/Rec to suit 100W SS3 Gen that is fited to the engine, plug and play to O.E madass loom
• Carb kit PE 26mm style with Force air filter and manifold
• CDI unit 4 pin performance unit
• Clutch calble correct for madass bars
• Throttle cable 50mm longer to suite off set carb
• Breather foam block
• NGK C7HSA spark plug
• Exhaust gasket
• Folding tip gear change
• Front sprocket 16T 428

OPTION FOR CLEAR FLOAT

OPTION FOR CNC CHOKE
Please note this engine must run a Non CAT exhaust and a straight through silencer.

Engine details

• All up gears positive stop.
• 5 Plate clutch
• Bridged crank cases with new needle roller drive shaft bearing
• Cam shaft NBR 6.9 lift
• Balanced crankshaft
• Performance valve spring kit
• 28mm Inlet 23mm Exhaust valves
• Hivo cam chain with automatic cam chain tensioner
• No oil spinner now has out rigger housing to support R/H side of crank
• SS3 530 gram 100W gen

Service and Starting Info