CARB ONLY

CARB ONLY
  • 16mm Carb Mikuni. Madass 50cc. OE style

    16mm Carb Mikuni. Madass 50cc. OE style

    OE style carb for the stock madass 50cc 35mm filter fitting 47mm bolt centers flange fitting 16mm choke size  

    £39.98 £33.32 ExVAT

    £39.98 £33.32 ExVAT

  • 16mm YSN Carb. 50cc to 75cc

    16mm YSN Carb. 50cc to 75cc

    Carb YSN 16mm for 50 to 75cc Small unit ideal for the small non tuned engines. Suitable to fit onto standard honda flange 47mm bolt centers flange fitting 35mm filter fitting Uses main jet 7481

    £38.99 £32.49 ExVAT

    £38.99 £32.49 ExVAT

  • 18mm. Oval bore Molkt Carb PB style 50cc to 75cc

    18mm. Oval bore Molkt Carb PB style 50cc to 75cc

    18mm. Oval bore Molkt Carb PB style 50cc to 75cc This is a 4 stroke carb with correct pilot screw on engine side. Butterfly choke 35mm air filter fitting 48mm bolt centres Honda style off set flange 15mm slide Pilot jet 32…

    £26.80 £22.33 ExVAT

    £26.80 £22.33 ExVAT

  • 19mm PB style carb No fuel tap Left or Right Choke lever option

    19mm PB style carb No fuel tap Left or Right Choke lever option

    19mm PB carb No fuel tap Left or Right Choke lever option Latching choke with lever Based on sitting on bike with carb air filter facing to back of bike. This is suitable for use with DAX and C90 as a replacement Copy of the P…

    £23.99 £19.99 ExVAT

    £23.99 £19.99 ExVAT

  • 19mm PB style carb with integral fuel tap

    19mm PB style carb with integral fuel tap

    19mm PB carb with integral fuel tap This is suitable for use with DAX and C90 as a replacement Copy of the PB19 range butterfly type cable operation Carb with fuel tap has one feed in now giving a better flow rate, photo to be update…

    £23.99 £19.99 ExVAT

    £23.99 £19.99 ExVAT

  • 19mm Racing NIBBI round bore carb

    19mm Racing NIBBI round bore carb

    19mm Racing NIBBI round bore carb Honda flanged 47mm centres off set up. 19mm choke size 45/46mm air filter stub 4 stroke needle Air cut 4.0 95 main Jet part number 4190 32 Pilot jet part number We’ve not used one …

    £35.20 £29.33 ExVAT

    £35.20 £29.33 ExVAT

  • 22mm Shengwei/Keikhinkt! Carb PB style C90 Fuel top or Non fuel tap

    22mm Shengwei/Keikhinkt! Carb PB style C90 Fuel top or Non fuel tap

    22mm Shengwei/Keikhinkt/Molkt Carb PB style C90 Fuel tap or Non fuel tap New in stock looking PB19 but with 22mm choke name on carb varies Option with fuel tap has ON/OFF/RES duel feed Hand lever butterfly choke 38mm air filter …

    £26.99 £22.49 ExVAT

    £26.99 £22.49 ExVAT

  • 22mm YSN, DENI oval bore carb

    22mm YSN, DENI oval bore carb

    YSN, DENI 22mm Carb Suitable for use with standard Honda flange 48mm centres. 35mm filter fitting Overall height including cable adjuster & drain 137mm Ideal for 72cc-110cc engines

    £35.99 £29.99 ExVAT

    £35.99 £29.99 ExVAT

  • 24mm or 28mm VM FLAT slide Mikuni

    24mm or 28mm VM FLAT slide Mikuni

    24mm or 28mm TM flat slide Mikuni Mikuni's (flat slide) carburetor, the TM Series Carburetors provide significant performance improvements over older round slide carburetors. Air flows faster and smoother through the TM Series venturi du…

    £145.99 £121.66 ExVAT

    £145.99 £121.66 ExVAT

  • 26 28 30 PE style NIBBI RACING carb

    26 28 30 PE style NIBBI RACING carb

    PE 26 28 30 NIBBI RACING carb These are a nicely made Chinese carb, good casting, slide to body clearance. Has some nice cnc parts too, top and idle screw. The 28 and 30 has a polished entrance, the 26 is not. Uses the normal KS…

    £70.00 £58.33 ExVAT

    £70.00 £58.33 ExVAT

  • 26mm Mikuni Carb Oval bore

    26mm Mikuni Carb Oval bore

    Mikuni 26mm Carb Standard 48mm bolt on fixing Ideal for 125cc engines see jet options below 125 engines around 100 102.5 105 subject to tune. Please note this range of carbs have 22 stamped on them, this is the slide size not choke size…

    £32.50 £25.00
    £20.83 ExVAT

    £32.50 £25.00
    £20.83 ExVAT

  • 26mm Mikuni VM Carb including jet on line 4 STROKE

    26mm Mikuni VM Carb including jet on line 4 STROKE

    Mikuni VM 26 mm Performance carb for tuned or standard engines up to 180cc Needle jet 249 0-0 Needle 4J 13 Pilot 35 Main jet please chose from drop down 42mm filter fitment stub size   PLEASE NOTE: The Jetting …

    £123.60 £103.00 ExVAT

    £123.60 £103.00 ExVAT

  • 26mm Molkt Carb.

    26mm Molkt Carb.

    Sadly now we have stopped selling this round bore Molkt as its become too unreliable 4 out of 10 have faults and some even that will come and go. We have now replaced it with the new PE26 style carb part number 3548 has far better results o…

    £39.98 £33.32 ExVAT

    £39.98 £33.32 ExVAT

  • 26mm PE style Carb Huge upgrade over the MOLKT

    26mm PE style Carb Huge upgrade over the MOLKT

    Carb 26mm PE style OOR2  Better Casting Perfect for the below engines Z110HO, Z125HO, Z155 YX 140, 160 170 2V & 4V Custom made needle reduces fuel passing under decell that causes a misfire on re opening of the throttle. We …

    £59.98 £49.98 ExVAT

    £59.98 £49.98 ExVAT

  • 26mm Power jet YSN carb flat slide

    26mm Power jet YSN carb flat slide

    26mm Power jet YSN carb flat slide Selling off less than cost price due to we don’t find them good unless you are only using for mid to flat out rev range.. They have been high speed polished turned for a smooth choke & a chrome sli…

    £70.00 £39.98
    £33.32 ExVAT

    £70.00 £39.98
    £33.32 ExVAT

  • 26mm TK carb OE style. Suitable for MadAss 125

    26mm TK carb OE style. Suitable for MadAss 125

    26mm 125 carb OE style Suitable for MadAss Direct replacment standard carb 47mm bolt centers flange fitting

    £40.00 £33.33 ExVAT

    £40.00 £33.33 ExVAT

  • 26mm VM style Carb

    26mm VM style Carb

    VM style 26 mm Basic castings but works.. Push fitting 35mm. 42mm filter stub size Main 100 Pilot 43 Slide cut 2.00 Needle 5GN38  

    £26.80 £22.33 ExVAT

    £26.80 £22.33 ExVAT

  • 28mm PE style carb Z190 pre jetted JINGKE

    28mm PE style carb Z190 pre jetted JINGKE

    PE style carb Pre jetted to work with the Z190 with ignition corrector and free flowing exhaust.. Brass chrome slide nice clearnce 50mm filter stub fitting Manifold stub fitting 35mm Carb length 85mm overall Height 145mm i…

    £49.98 £41.65 ExVAT

    £49.98 £41.65 ExVAT

  • 28mm Power jet YSN carb flat slide

    28mm Power jet YSN carb flat slide

    28mm Power jet YSN carb flat slide Selling off less than cost price due to we don’t find them good unless you are only using for mid to flat out rev range.. They have been high speed polished turned for a smooth choke & a chrome slide…

    £70.00 £39.98
    £33.32 ExVAT

    £70.00 £39.98
    £33.32 ExVAT

  • 30mm carb Pump type

    30mm carb Pump type

    30mm Pump carb Large 30mm carb for 200cc up to 300cc suitbale for standard Honda bolt fixing

    £40.00 £33.33 ExVAT

    £40.00 £33.33 ExVAT

  • 30mm KF PZ style carb 49mm bolt centers

    30mm KF PZ style carb 49mm bolt centers

    30mm KF PZ style carb 49mm bolt centers 42mm air filter stub Engine over 200cc to 280cc Lock on type choke K61 needle 104 Main KEIHIN slot type 36 pilot

    £27.00 £22.50 ExVAT

    £27.00 £22.50 ExVAT

  • Carb 28mm PE style stock with cnc top & idle adjuster

    Carb 28mm PE style stock with cnc top & idle adjuster

    Carb 28mm PE style stock with cnc top & idle adjuster Brass chrome slide nice clearance 46mm filter stub fitting Manifold stub fitting 33mm Carb length 83mm overall Height 145mm inc rubber top 6mm fuel hose fitting push fi…

    £40.00 £33.33 ExVAT

    £40.00 £33.33 ExVAT

  • Carb service kit  PZ26/30 type Deni and others

    Carb service kit PZ26/30 type Deni and others

    Carb repair kit PZ26/30 type Will fit the ace 125 too, recommed you use the orignal jets and needle 1 X Float plastic type 1 X Float needle 1 X float pivot pin 1 X Float gasket 1 X Intake seal ORing 1 X Slide top flat seal…

    £9.59 £7.99 ExVAT

    £9.59 £7.99 ExVAT

  • Carb service kit PB19 type Round bowl C90

    Carb service kit PB19 type Round bowl C90

    Carb repair kit PB19 type all 15 mm slide modles in the 8J range Load of C90’s have done a number of road miles and carb parts start getting worn, had loads of carbs we just can’t jetted correctly due to the top part needle jet has w…

    £11.20 £9.33 ExVAT

    £11.20 £9.33 ExVAT

  • Float gasket PZ26/30 carbs

    Float gasket PZ26/30 carbs

    Float gasket PZ26/30 carbs

    £3.59 £2.99 ExVAT

    £3.59 £2.99 ExVAT

Loading
Top