CARB ONLY

CARB ONLY
  • 16mm Carb vintage Honda style with tap ON/RES

    16mm Carb vintage Honda style with tap ON/RES

    16mm choke carb Stock 47mm threaded bolt centers 6mm push on fuel lines 35mm filter stub fitting Jetted 50/70cc Main 80 Pilot 35 Due to the amount of ethanol in normal unleaded fuel these days it can destroy the rubber …

    £41.99 £34.99 ExVAT

    £41.99 £34.99 ExVAT

  • 16mm Dekli Carb. 50cc to 75cc

    16mm Dekli Carb. 50cc to 75cc

    Carb Dekli16mm for 50 to 75cc Small unit ideal for the small non tuned engines. Suitable to fit onto standard honda flange 47mm bolt centers flange fitting 35mm filter fitting Uses main jet 7481

    £38.99 £32.49 ExVAT

    £38.99 £32.49 ExVAT

  • 18mm Carb Mikuni. Madass 50cc. OE style 2mm over size

    18mm Carb Mikuni. Madass 50cc. OE style 2mm over size

    OE style carb for the stock madass 50cc 35mm filter fitting 47mm bolt centers flange fitting 18mm choke size   No longer with outer cable bracket  

    £39.98 £33.32 ExVAT

    £39.98 £33.32 ExVAT

  • 18mm. Oval bore Molkt Carb PB style 50cc to 75cc

    18mm. Oval bore Molkt Carb PB style 50cc to 75cc

    18mm. Oval bore Molkt Carb PB style 50cc to 75cc This is a 4 stroke carb with correct pilot screw on engine side. Butterfly choke 35mm air filter fitting 48mm bolt centres Honda style off set flange 15mm slide Pilot jet 32…

    £26.80 £22.33 ExVAT

    £26.80 £22.33 ExVAT

  • 19mm PB style carb 3mm over size slide with integral fuel tap C90 DEKLI

    19mm PB style carb 3mm over size slide with integral fuel tap C90 DEKLI

    19mm PB carb 3mm over sized slide much better flow rate, with integral fuel tap This is suitable for use with DAX and C70/90/110 as a replacement Copy of the PB19 range butterfly type cable operation Standard bolt on flange 48mm bolt…

    £36.00 £30.00 ExVAT

    £36.00 £30.00 ExVAT

  • 19mm PB style carb No fuel tap Left or Right Choke lever option

    19mm PB style carb No fuel tap Left or Right Choke lever option

    19mm PB carb No fuel tap Left or Right Choke lever option Latching choke with lever Based on sitting on bike with carb air filter facing to back of bike. This is suitable for use with DAX and C90 as a replacement Copy of the P…

    £23.99 £19.99 ExVAT

    £23.99 £19.99 ExVAT

  • 19mm PB style carb with integral fuel tap C90

    19mm PB style carb with integral fuel tap C90

    19mm PB carb with integral fuel tap This is suitable for use with DAX and C70/90 as a replacement Copy of the PB19 range butterfly type cable operation Standard bolt on flang 48mm bolt centers with captive nuts Secondary pilot scr…

    £23.99 £19.99 ExVAT

    £23.99 £19.99 ExVAT

  • 19mm Racing NIBBI round bore carb

    19mm Racing NIBBI round bore carb

    19mm Racing NIBBI round bore carb Honda flanged 47mm centres off set up. 19mm choke size 45/46mm air filter stub 4 stroke needle Air cut 4.0 95 main Jet part number 4190 32 Pilot jet part number We’ve not used one …

    £35.20 £29.33 ExVAT

    £35.20 £29.33 ExVAT

  • 19mm YSN Carb. 70cc to 110cc

    19mm YSN Carb. 70cc to 110cc

    Carb YSN 16mm for 50 to 75cc Small unit ideal for the small non tuned engines. Suitable to fit onto standard honda flange 47mm bolt centers flange fitting 35mm filter fitting Uses main jet 7481

    £29.99 £24.99 ExVAT

    £29.99 £24.99 ExVAT

  • 20mm Shengwei Carb

    20mm Shengwei Carb

    YSN 20mm Carb Suitable for use with standard Honda flange 47mm centres. 35mm filter fitting Overall height including cable adjuster & drain 137mm Ideal for 72cc-110cc engines Uses main jet 7481

    £27.00 £22.50 ExVAT

    £27.00 £22.50 ExVAT

  • 22mm Shengwei/Keikhinkt! Carb PB style C90 Fuel tap or Non fuel tap

    22mm Shengwei/Keikhinkt! Carb PB style C90 Fuel tap or Non fuel tap

    22mm Shengwei/Keikhinkt/Molkt Carb PB style C90 Fuel tap or Non fuel tap New in stock looking PB19 but with 22mm choke name on carb varies Option with fuel tap has ON/OFF/RES duel feed Hand lever butterfly choke 38mm air filter …

    £26.99 £20.40
    £17.00 ExVAT

    £26.99 £20.40
    £17.00 ExVAT

  • 22mm YSN, DENI oval bore carb

    22mm YSN, DENI oval bore carb

    YSN, DENI 22mm Carb Suitable for use with standard Honda flange 48mm centres. 35mm filter fitting Overall height including cable adjuster & drain 137mm Ideal for 72cc-110cc engines

    £35.99 £29.99 ExVAT

    £35.99 £29.99 ExVAT

  • 24mm Carb PZ style oval bore

    24mm Carb PZ style oval bore

    YSN, DENI 24mm Carb Suitable for use with standard Honda flange 47/8mm centres. 36mm filter fitting 35mm’s will fit Overall height including cable adjuster & drain 160mm Ideal for 110cc up to 200cc like Honda TLR low reving engines …

    £42.00 £35.00 ExVAT

    £42.00 £35.00 ExVAT

  • 26mm Mikuni Carb Oval bore

    26mm Mikuni Carb Oval bore

    We have a better carb now see part number 3547 Mikuni 26mm Carb Standard 48mm bolt on fixing Ideal for 125cc engines see jet options below 125 engines around 100 102.5 105 subject to tune. Please note this range of carbs have 22 stam…

    £32.50 £27.60
    £23.00 ExVAT

    £32.50 £27.60
    £23.00 ExVAT

  • 26mm Molkt Carb.

    26mm Molkt Carb.

    Sadly now we have stopped selling this round bore Molkt as its become too unreliable 4 out of 10 have faults and some even that will come and go. We have now replaced it with the new PE26 style carb part number 3548 has far better results o…

    £39.98 £33.32 ExVAT

    £39.98 £33.32 ExVAT

  • 26mm Oval bore MOLKT NEW Better fuelling for 125 BV or small valve engines

    26mm Oval bore MOLKT NEW Better fuelling for 125 BV or small valve engines

    26mm Oval bore MOLKT NEW Better fuelling for 125 BV or small valve engines Also ideal for Vertical CG style engines up to 150cc  38mm filter fitting. Pilot 38. This is an odd jet we don’t stock but 38 is the normal range for 125…

    £35.20 £29.33 ExVAT

    £35.20 £29.33 ExVAT

  • 26mm PE style Power jet Carb Huge upgrade over the MOLKT

    26mm PE style Power jet Carb Huge upgrade over the MOLKT

    Carb 26mm PE style OOR2  Better Casting  Have gone back to normal pilot screw brass type photo to be updated.. If you want a clear float bowl see drop down For CNC direct pull up choke see drop down New option for force air fi…

    £63.60 £49.98
    £41.65 ExVAT

    £63.60 £49.98
    £41.65 ExVAT

  • 26mm Power jet YSN carb flat slide

    26mm Power jet YSN carb flat slide

    26mm Power jet YSN carb flat slide Selling off less than cost price due to we don’t find them good unless you are only using for mid to flat out rev range.. They have been high speed polished turned for a smooth choke & a chrome sli…

    £70.00 £28.80
    £24.00 ExVAT

    £70.00 £28.80
    £24.00 ExVAT

  • 26mm TK carb OE style. Suitable for MadAss 125

    26mm TK carb OE style. Suitable for MadAss 125

    26mm 125 carb OE style Suitable for MadAss Direct replacment standard carb 47mm bolt centers flange fitting

    £51.60 £43.00 ExVAT

    £51.60 £43.00 ExVAT

  • 26mm. VM26. Style carb

    26mm. VM26. Style carb

    26mm. VM26. Style carb Unknown what brand Main jet 100 normal short hex Pilot 42 can use normal VM 26 pilot jet Needle 5GN3 Slide cut looks like a 3 Push ft 35mm Pull out side choke  

    £33.60 £28.00 ExVAT

    £33.60 £28.00 ExVAT

  • 28mm PE style carb Z190 standard one that comes with engines

    28mm PE style carb Z190 standard one that comes with engines

    PE style carb This carb comes with new Z190 engines with fixed needle. Brass chrome slide nice clearance 50mm filter stub fitting Manifold stub fitting 35mm Carb length 85mm overall Height 145mm inc rubber top 28mm chok…

    £48.00 £30.00
    £25.00 ExVAT

    £48.00 £30.00
    £25.00 ExVAT

  • 28mm PE style carb Z190/212 pre jetted JINGKE

    28mm PE style carb Z190/212 pre jetted JINGKE

    PE style carb Pre jetted to work with the Z190 with ignition corrector and free flowing exhaust.. Brass chrome slide nice clearnce 50mm filter stub fitting Manifold stub fitting 35mm Carb length 85mm overall Height 145mm i…

    £49.98 £41.65 ExVAT

    £49.98 £41.65 ExVAT

  • 28mm Power jet YSN carb flat slide

    28mm Power jet YSN carb flat slide

    28mm Power jet YSN carb flat slide Selling off less than cost price due to we don’t find them good unless you are only using for mid to flat out rev range.. They have been high speed polished turned for a smooth choke & a chrome slide…

    £70.00 £30.00
    £25.00 ExVAT

    £70.00 £30.00
    £25.00 ExVAT

  • 30mm KF PZ style carb 49mm bolt centers

    30mm KF PZ style carb 49mm bolt centers

    30mm KF PZ style carb 49mm bolt centers 42mm air filter stub Engine over 200cc to 280cc Lock on type choke K61 needle 104 Main KEIHIN slot type 36 pilot

    £27.00 £22.50 ExVAT

    £27.00 £22.50 ExVAT

  • Carb 28mm PE style stock with cnc top & idle adjuster

    Carb 28mm PE style stock with cnc top & idle adjuster

    Carb 28mm PE style stock with cnc top & idle adjuster Brass chrome slide nice clearance 46mm filter stub fitting Manifold stub fitting 33mm Carb length 83mm overall Height 145mm inc rubber top 6mm fuel hose fitting push fi…

    £40.00 £36.00
    £30.00 ExVAT

    £40.00 £36.00
    £30.00 ExVAT

Loading
Top