Engine. 140cc. 2 valve. Performance engine. Suitable for MADASS 125. Plug and play with 3 phase 100W gen
This is our full kit to convert your madass into a monster, its a full kit with all you will need to convert.
Now in black
In the kit you will get:
- Engine 140cc 2 valve
- 1 x Reg/Rec to suit 100W SS3 Gen that is fited to the engine, plug and play to O.E madass loom
- Carb kit PE 26mm style with Force air filter and manifold
- CDI unit 4 pin performance unit
- Clutch cable correct for madass bars
- Throttle cable 50mm longer to suite off set carb
- Breather foam block
- NGK C7HSA spark plug
- Exhaust gasket
- Folding tip gear change
- Front sprocket 15T 428
Please note this engine must run a Non CAT exhaust and a straight through silencer.
Engine details
- All up gears positive stop.
- 5 Plate clutch
- Bridged crank cases with new needle roller drive shaft bearing
- Cam shaft NBR 6.9 lift
- Balanced crankshaft
- Performance valve spring kit
- 27mm Inlet 23mm Exhaust valves
- SS3 530 gram 100W gen
Service and Starting Info