Immobilizer touch pad system for A/C ignitions.
This is a first with the right system to work with the 5 & 6 pin A/C ignitions.
We wire them in to the ignition feed out so you can turn on the ignition and put the contact pad on the sender and it will let off the kill switch from ground.
Sender pad can be put inside of side panel or behind plastic.
Has an LED to show system is on this can be glued in to a panel through a 5mm hole.
Wiring
Black = Negative battery
Red = Positive + battery via fuse
Green to piggy back to kill switch or direct to negative kill on CDI