Stainless 304 exhaust/inlet tube CONE reducers sizes O/D

Stainless 304 exhaust/inlet tube CONE reducers sizes O/D
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge

£3.96 £3.30 ExVAT

(Quantity discounts available)

Product Code: 9819

Stainless 304 exhaust/inlet tube CONE reducers Sizes see drop down menu

These cone reduces vary in length, the bigger reduction the longer the cone, example  19 to 51 = 122mm long & 19 to 25 is 25mm long

Wall thickness varies too from 1.5mm to 2mm on the larger sizes

We do other bends, fittings and straight pipe in our main ooracing store (stainless bends)

Bends in degrees 30 45 60 90 180

T Pieces

Y Pieces

All sizes are OD (outside diameter)

Price per reducer

Wall thickness 1.5mm 304 grade is nice to weld less brittle than the 316 grade.

There a nice smooth reduction with a clean cut so you can butt weld close connections

We decided to stock these really useful polished 304 grade reducers for custom exhausts or inlets, and water pipe systems.

You can simply use insulation tap to hold your bends to the straight pipe to mock up your system, holds well so you can take it to your local Tig welder and get him or her to cut a 10mm strip out your tape to tack weld in 2 places before removing all the tape.

Product Code 9819
Condition New
Weight 0.1Kg

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.


Quantity Price per unit
10+ £2.97
Top