Swing arm. +3. Girder. Braced. Suitable for use with Monkey style bikes

Swing arm. +3. Girder. Braced. Suitable for use with Monkey style bikes
  • Click to enlarge

£40.00 £33.33 ExVAT

Product Code: 0070A

Braced swing arm from the Girder range.

Bushes for frame connection.

Good finish for the value. Bulk stock available hence the low price.

Kit includes:

  • +3 Swing arm 29cm Length (26cm is standard)
  • CNC Chain adjustors 12mm
  • Brake rod
  • Chain guide
  • Shock bolts

 

Specifications:

  • 340mm Length over all
  • 29cm from eye centre to eye centre
  • Alloy Construction
  • 12mm Axle aperture
  • 125mm Gap between bushes
  • 120mm High without Suspension lugs
  • 10mm Suspension lugs

 

PLEASE NOTE:

Length of swing arm is measured from Centre of wheel axle aperture to centre of frame bolt aperture.

Gearing to clear brace need to be around 13T Front and 24T Rear or you will need to cut part of brace away.

 

With rubber swinging arm bushes you only want to tighten the pivot bolt enough so the centre of the bush can still rotate on full swing.

Don’t run the chain too tight or it will rip out the left side bush.

Bigger CC high torque engine will hammer the bushes

 

Product Code 0070A
Condition New
Weight 2.5Kg
Top