Wheel kit. Alloy rims. Pirelli SL26. WIDE REAR. Suitable for DAX

Wheel kit alloy rims Pirelli SL26 lower profile look

Suitable for use with DAX bikes

Specifications:

• 3.50" X 10" Alloy split rim (Rear)
• 2.50" X 10" Alloy split rim (Front)
• SL26 110/80/10 tyre J rated (Rear)
• SL26 100/80/10 tyre J rated (Front)
• 2 X Vee Rubber innertubes
• 8 X Nuts, Bolts and Washers (4 per wheel)

Rear wheel is off set to clear chain

Buying the kit prebuilt saves time and effort for you. We are selling this kit built for free. It is pre built ready to bolt on, inflate and ride.

 

Direct from Pirelli Website:

• Optimised for multi-purpose scooters used in city traffic with a need for maximum control in all weather conditions.
• Safe and reliable in all urban conditions for the new generation of scooter.
• Tread with large grooves to ensure excellent performance in the wet, a comfortable ride and high mileage.
• Effective use in all seasons and in all weather conditions."

PLEASE NOTE:

• There are 8 fixing holes in the rims. 4 large and 4 small. The 4 smaller holes fix the 2 halves of the rims together.
• The larger 4 holes are used to fix the rim to the hub or hub adaptor. (Nuts and bolts not supplied)
• Once a tyre is fitted to the rim do NOT inflate until the rim is fixed SECURELY to the HUB to avoid permanent distortion.
• There may be a small amount of waver but all rims are checked before being sent.
• THE SL26 TREAD PATTERN IS VERY DIFFERENT THAN THE SL38