Wheel. 12". MAG. Super Moto. Pit bike. Rear. SDG fitment. Choice of width

Wheel MAG Super Moto pit bike SDG fitment 2.50 or 3.00" width

Choice oof width available:

• 2.50" Rear wheel 12" x 15 bearings with seals.
• 3.00" Rear wheel 12" x 15 bearings with seals.
• Weight 3.50Kg Approx

You can also now choose your bearing quality:

• Standard bearing
• Uprated ZENS Bearings.

One of the advanages of choosing the uprated bearings is that there is potentially the problem where the standard bearings get bruised from cold fitting in China. We remove these bearings. Heat fit the new ZENS Bearings and you get what you want. This will give you a more reliable bearing, smoother running system.

These rims are with the tubeless security lip for running low PSI and we have fitted up rated bearings with seals and dust seals

The rims also have a deeper inner well so tyre fitting is a breeze!

Rubber tyre valves are included in the wheel price

The wheels will fit with OE SDG wheel spacers and disc/sprockets

Please note smallest rear sprocket that can be used is a is a 32T any smaller and the hub needs to be turned down.

Replacment bearings 6202 35mm x 15mm x 11mm part number 0257

Make sure you use bolts that use the full length of the threads in hub with locktite

Bearing conversion to 12mm part number 7717

• Overall width of hub 136mm
• Face to face 131mm

PLEASE NOTE

THE NEW BATCH OF FRONT 2.15" HAVE A SLIGHTLY MORE SATIN FINISH THAN THE OLDER MATT FINISHED ONES WE HAD PREVIOUSLY.

WHEELS MAY HAVE SMALL IMPERFECTIONS IN THE CASTING OR PAINT FINISH. THIS WILL NOT HINDER PERFORMANCE.