Wheel. 12". MAG. Super Moto. Pitbike. Front. SDG fitment. Choice of width.

Wheels MAG Super Moto pit bike SDG fitment FRONT 2.15 or 2.50" widths

Choose from:

• 2.15" Width Wheel. 12" x 15mm bearings with seals.
• 2.50" Width Wheel. 12" x 15mm bearings with seals.
• Weight 2.75Kg approx

You can also now choose your bearing quality:

• Standard bearing
• Uprated ZENS Bearings.

One of the advanages of choosing the uprated bearings is that there is potentially the problem where the standard bearings get bruised from cold fitting in China. We remove these bearings. Heat fit the new ZENS Bearings and you get what you want. This will give you a more reliable bearing, smoother running system.

These rims are with the tubeless security lip for running low PSI and we have fitted up rated Bearings with seals and dust seals

Rubber tyre valves included in price

Deep well for easier tyre fitting

Replacment bearings 6202 35mm x 15mm x 11mm part number 0257

Bearing conversion to 12mm part number 7717

Make sure you use bolts that use the full length of the threads in hub with locktite

Hub info

• Overall width  99mm
• Disc face to end 96.5mm

PLEASE NOTE

THE NEW BATCH OF FRONT 2.15" HAVE A SLIGHTLY MORE SATIN FINISH THAN THE OLDER MATT FINISHED ONES WE HAD PREVIOUSLY.

WHEELS MAY HAVE SMALL IMPERFECTIONS IN THE CASTING OR PAINT FINISH. THIS WILL NOT HINDER PERFORMANCE.