Starter clutch upgrade Z190 6 roller

Starter clutch upgrade Z190 6 roller
  • Click to enlarge

£29.86 £24.88 ExVAT

Product Code: 3622

Starter clutch upgrade Z190 6 roller

This kit is designed to prevent the issue of the 3 roller type digging into the starter hub with more tuned engines.

Has 6 roller to spread the load.

Do not use be used on damaged or slightly marked starter hubs, will end up breaking out the rollers, we recommend you replace at the same time as up grading..

74mm O/D

11mm thick

38mm I/D

 

Due to the extra rollers it can make it more difficult to fit starter hub in and easy to derail the springs, so we advise before fitting to the flywheel that all the springs and roller are sitting correctly, the lower the flywheel on to the clutch and then flip over to bolt on the clutch. Remove the plastic insert and fit the hub into the clutch by turning anti clock till it drops in, they you can fit it onto the crankshaft.

Worth carrying out the above to prevent the springs coming out and derailing the rollers.

Product Code 3622
Condition New
Weight 0.4Kg
Top