This is our full alloy engine plop enduro
This we have created by using a 47mm 70cc shorter cylinder with a 6mm spacer between the cylinder and block. so will have 49cc marked on it but its an 85cc.
Now with rubber engine mounts, makes a huge difference.
Awesome engine that packs a punch, fully set up by us.
Specs
Engine. 3 speed close ratio. Semi automatic. locked out 1st
Gears N-1-2-3
Alloy cylinder 47mm
High compression piston
E22 head gas flowed
1mm extra lift camshaft
40 psi valve springs with 1.9mm spacer shims
Dialed in cam shaft
Brass cam chain tensioner
6 Friction plate clutch up grade
Pan magnet in clutch cover
VMR118 race ignition kit
Whats in the kit
1 x Engine
1 x CDI
1 x Coil
1 x Ignition loom
1 x Kill switch
1 x NGK spark plug
1 x Kick start
1 x Gear change
1 x Gen cover gasket
1 x Exhaust gasket and nut kit
1 x Breather hose
1 x Carb 19mm choke 15mm slide plop spec with inter grated fuel tap 2 or single feed. "uses original c90 mainfold"
1 x Service instructions
Single phase 2 Yellow wires D/C charging Super spin option
RACE no light has the Full VMR118
Engines are supplied with wiring instructions
Service info
- Engine oil: 10W/40 Mineral Oil
- Capacity approx: 600ml
- Valve clearance: 0.10mm inlet 0.12mm exhaust