Primary clutch cables are for the engines that have the lever coming out at the front of the clutch cover as the have the clutch on the end of the crank shaft.
The have 2 ways to gain the right amount of adjustment 1st adjusted on the clutch push rod and the 2nd is using the mid way cable adjuster this has approx 15mm of adjustment
See below length options inner overall length of wire and outer cable “ both are measured from end to end”
Please compare lengths with your one before ordering
Lengths are approx due to adjustment
Outer x Inner
10A = 783mm x 850mm 58400-10A00
14A = 900mm x 965mm 58400-14A00
15A = 770mm x 840mm 58400-15A00
16HS = 882mm x 950mm Short version 58400-16H00
16HL = 945mm x 1005mm Longer version 58400-16H10
27A = 710mm x 805mm No mid adjuster 58400-27A00
30H = 900mm x 990mm
31H = 840mm x 960mm