Cam sprocket adjustable valve timing Z40 cam 2 Bolt 32T

Cam sprocket adjustable valve timing Z40 cam 2 Bolt 32T
  • Click to enlarge

£23.99 £19.99 ExVAT

Product Code: 8959

Cam sprocket adjustable valve timing Z40 cam 32T

Allows 30 degrees of adjustment

25H chain pitch Hardened steel

You need to run a 5mm washer on each bolt to increase holding area.

We have produced these sprockets with up to 35 degrees of adjustment so you can get your valve timing “LCA” bang on.

Due to the number of cams on the market and the amount of difference in how the crank shaft sprocket has been pressed on you will not be able to adjust to the last degree.

  • 2.9mm Thick
  • 8mm Centre hole
  • 67mm Diameter overall
  • 32 Teeth
  • M5 Bolt holes

This product is for engine tuner with experience in setting the valve timing with the correct method of timing dice and dial gauge.

Getting the right LCA can give you complete control of where you need you engine to develop its power.

Please note the higher cost of this is to cover the bespoke production in the uk.

Product Code 8959
Condition New
Weight 0.1Kg
Top