Loom kit all in one L/H switch gear CUB 50,70,90 12V, split phase

Loom kit and switches standard CUB C50 C70 C90 running stock charging split phase 12V with digital speedo 

This is great kit if you want to tidy up the handle bars and have only the all in one switch gear on the left side. You will need a throttle kit on the right side.

The switch is an all in one

Lights OFF/Pilot/main

High & low beam

Horn

Turn

The electric start is a clip on push switch you fit on the right hand side. This you don’t have to use if you are not E start”

Electric start but you don’t have to use this part if you have a non electric start engine

SPLIT PHASE CHARGING YELLOW/WHITE WIRES COMING FROM YOUR GEN, IF YOU HAVE 2 YELLOW'S THIS KIT IS NOT GOING TO WORK.

We have put this kit together so you can just swap out all of your old electrics and replace the lot.

What’s in the kit.

1 x Well made 12V CDI loom

1 x Reg/rec split phase

1 x L/H switch gear 

1 x CDI stock 5 pin

1 x Ignition switch and 2 keys plastic push in

1 x Flasher unit 1W up to 21W

1 x Cub digital speedo with rev counter, fuel gauge, warning lights turn, high beam and neutral light.

Speedo digital suitable for C50, C70, C90

This speedo has multi functions speed, rpm, fuel gauge, warning lights

Uses the normal speedo cable to drive

7 background colours

All of the above will arrive plugged together and tested.