Rojo EFI conversion to normal CDI, upgrade for tuning 50 & 125 skyteam Monkey DAX ST
Info on the drop downs
1 = coil colour
2 = CDI silicon protective cover
3 = Switch if you need to restrict the speed you can switch between full power or pre set rev limiter.
Made for the skyteam 2019 2020 Euro 4 later versions are differrnt not Euro 5
Fitting video https://www.youtube.com/watch?v=ZFQqM0-YGVE&t=5s
A lot of you want to tune your new fuel injected monkey but the limitations of the EFI prevent this. So we have made this kit that will plug and play into the original wiring loom.
Please check that wires in the plugs line up with the correct wires on bike loom
Ignition only kit
1 x 4 pin D/C CDI (choice of silicone cover and switch)
1 x Micro wiring loom
1 x Performance coil 12V
All pre wired with matching plugs to suit the Rojo EFI Skyteam Monkeys
Before plugging in check the wire colours aligne with the corresponding colours on the loom.
6 pin plug with 1 Black/red wire should align with black on the loom plug.
2 pin plug Green to green Blue/white to Blue/white
You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.
Quantity |
Price per unit |
10+ |
£44.99 |